Jeg bruker D-Link DWL-122 ( H/W vC1, FW v 3.10 ), sammen med Aircrack. Er det noen som kjenner til om det finnes drivere som fungerer bedre enn standard-driverne?

navn på den inf fila du bruker i dag ?
åpne inf fila i notepad og så ser du faktisk chipset osv...
eller bare post den her.
bruker du windows/linux ? wildpackets ?

Jeg benytter Windows, men kjører Backtrack i Vmware. Her er noe info fra filen, satser på at det er det du trenger.


[Version]
Signature = "$Chicago$"
Class = Net
ClassGUID = {4d36e972-e325-11ce-bfc1-08002be10318}
Provider = %D-Link%
Compatible = 1
CatalogFile = Dr71WU.cat
DriverVer = 09/28/2006, 3.00.01.0000

[ControlFlags]
;***********D-Link 802.11g board ***********
ExcludeFromSelect = VID_07D1&PID_3C03
ExcludeFromSelect = VID_07D1&PID_3C04
ExcludeFromSelect = VID_07D1&PID_3C07

[Manufacturer]
%D-Link% = D-Link,NTX86, NTAMD64


[D-Link]
; DisplayName Section DeviceID
; ----------- ------- --------
%D-Link.DeviceDesc% = D-Link.ndi, USB\VID_07D1&PID_3C03
%WUA1340.DeviceDesc% = WUA1340.ndi, USB\VID_07D1&PID_3C04
%DWA110.DeviceDesc% = WUA1340.ndi, USB\VID_07D1&PID_3C07


[D-Link.NTX86]
; DisplayName Section DeviceID
; ----------- ------- --------
%D-Link.DeviceDesc% = D-Link.ndi, USB\VID_07D1&PID_3C03
%WUA1340.DeviceDesc% = WUA1340.ndi, USB\VID_07D1&PID_3C04
%DWA110.DeviceDesc% = WUA1340.ndi, USB\VID_07D1&PID_3C07

[D-Link.NTAMD64]
; DisplayName Section DeviceID
; ----------- ------- --------
%D-Link.DeviceDesc% = D-Link.ndi, USB\VID_07D1&PID_3C03
%WUA1340.DeviceDesc% = WUA1340.ndi, USB\VID_07D1&PID_3C04
%DWA110.DeviceDesc% = WUA1340.ndi, USB\VID_07D1&PID_3C07

;
;*********************************************************** ********************************
; NT specific entries
;*********************************************************** ********************************

[D-Link.ndi.NT]
AddReg = Common.reg, RTUSB.ndi.NT.reg
Characteristics = 0x84 ; NCF_REMOVABLE | NCF_HAS_UI | NCF_PHYSICAL
BusType = 15 ;USB
CopyFiles = NT.CopyFiles
*IfType = 71 ; IF_TYPE_IEEE80211
*MediaType = 16 ; NdisMediumNative802_11
*PhysicalMediaType = 9 ; NdisPhysicalMediumNative802_11


[WUA1340.ndi.NT]
AddReg = Common.reg, RTUSB.ndi.NT.reg
Characteristics = 0x84 ; NCF_REMOVABLE | NCF_HAS_UI | NCF_PHYSICAL
BusType = 15 ;USB
CopyFiles = NT.CopyFiles
*IfType = 71 ; IF_TYPE_IEEE80211
*MediaType = 16 ; NdisMediumNative802_11
*PhysicalMediaType = 9 ; NdisPhysicalMediumNative802_11

; NT services sections
[D-Link.ndi.NT.Services]
AddService = RT73, 2, D-Link.Service, common.EventLog

[WUA1340.ndi.NT.Services]
AddService = RT73, 2, D-Link.Service, common.EventLog


;*********************************************************** ********************************
; NTAMD64 specific entries
;*********************************************************** ********************************

[D-Link.ndi.NTAMD64]
AddReg = Common.reg, RTUSB.ndi.NT.reg
Characteristics = 0x84 ; NCF_REMOVABLE | NCF_HAS_UI | NCF_PHYSICAL
BusType = 15 ;USB
CopyFiles = NTAMD64.CopyFiles
*IfType = 71 ; IF_TYPE_IEEE80211
*MediaType = 16 ; NdisMediumNative802_11
*PhysicalMediaType = 9 ; NdisPhysicalMediumNative802_11

[WUA1340.ndi.NTAMD64]
AddReg = Common.reg, RTUSB.ndi.NT.reg
Characteristics = 0x84 ; NCF_REMOVABLE | NCF_HAS_UI | NCF_PHYSICAL
BusType = 15 ;USB
CopyFiles = NTAMD64.CopyFiles
*IfType = 71 ; IF_TYPE_IEEE80211
*MediaType = 16 ; NdisMediumNative802_11
*PhysicalMediaType = 9 ; NdisPhysicalMediumNative802_11

; NT services sections
[D-Link.ndi.NTAMD64.Services]
AddService = RT73, 2, D-Link.Service, common.EventLog

[WUA1340.ndi.NTAMD64.Services]
AddService = RT73, 2, D-Link.Service, common.EventLog

;*********************************************************** ********************************
; common regs for NT and W9x
;*********************************************************** ********************************

[Common.reg]
;*********************************************************** ********************************
; System Level Property
;
; Current Profile

ftp://ftp.dlink.com/Wireless/wua1340...1340_v1.30.zip

nyere driver :-)

Perfectementos!! Takk, takk!