Hallo.
Har en kamerat som lurer på:
Passer en Pioner SA-3000 med disse Høytalerne?
Dette er hva jeg har funnet ut om forsterkeren:
POWER AMPLIFIER SECTION
Continuous Power Output is 40 watts per channel min. at 8 ohms from 20 hertz to 20,000 hertz with no more than 0.02% total harmonic distortion,
or 40 watts per channel at 4 ohms from 20 hertz to 20,000 hertz with no more than 0.02% total harmonic distortion
Total Harmonic Distortion:(20 to 20,000Hz, 8 ohms from AUX)
Intermodulation Distortion: (50 Hz:7 kHz = 4:1,8 ohms from AUX)
No more than 0.005 % (Continuous rated power output)
No more than 0.004% (20 watts per channel power output)
Output.: Speaker: A, B
Damping Factor:30 (20 to 20,000Hz, 8 ohms)
PREAMPLIFIER SECTION
Input Sensitivity/Impedance:
PHONO: 2.5 mV/50 Kohms, TUNER, AUX, TAPE PLAY: 150 mV/50 Kohms
PHONO Overload Level: (1kHzT.H.D. 0.01 %) 230 mV
Output Level: TAPE REC: 150 mV
Frequency Response.
PHONO: 20 to 20000 Hz ± 3 dB
TUNER, AUX, TAPE PLAY:
10 to 100.000 Hz + 0 dB, - 3 dB
Hum and Noise: (Short-circuited A network)
PHONO: 86 dB (MM) TUNER, AUX, TAPE PLAY: 100 dB
Tone Control: Bass: ± 10 dB (100 Hz), Treble: ± 10 dB (10 kHz)
Loudness Contour: (Volume Control set at- 40 dB position) + 6 dB (100 Hz),+ 3 dB (10 kHz)
Semiconductors: Transistors: 30, Diodes: 22
MISCELLANEOUS
Power Requirements: 220/240 V (switchable) 50-60 Hz
Power Consumption: 330 watts (max.)
Dimensions: 380 (W) x 83 (H) x 295 (D) mm
Weight : 7.6 kg
Kilde: http://www.audiokarma.org/forums/showthread.php?t=9656
Har en kamerat som lurer på:
Passer en Pioner SA-3000 med disse Høytalerne?
Dette er hva jeg har funnet ut om forsterkeren:
POWER AMPLIFIER SECTION
Continuous Power Output is 40 watts per channel min. at 8 ohms from 20 hertz to 20,000 hertz with no more than 0.02% total harmonic distortion,
or 40 watts per channel at 4 ohms from 20 hertz to 20,000 hertz with no more than 0.02% total harmonic distortion
Total Harmonic Distortion:(20 to 20,000Hz, 8 ohms from AUX)
Intermodulation Distortion: (50 Hz:7 kHz = 4:1,8 ohms from AUX)
No more than 0.005 % (Continuous rated power output)
No more than 0.004% (20 watts per channel power output)
Output.: Speaker: A, B
Damping Factor:30 (20 to 20,000Hz, 8 ohms)
PREAMPLIFIER SECTION
Input Sensitivity/Impedance:
PHONO: 2.5 mV/50 Kohms, TUNER, AUX, TAPE PLAY: 150 mV/50 Kohms
PHONO Overload Level: (1kHzT.H.D. 0.01 %) 230 mV
Output Level: TAPE REC: 150 mV
Frequency Response.
PHONO: 20 to 20000 Hz ± 3 dB
TUNER, AUX, TAPE PLAY:
10 to 100.000 Hz + 0 dB, - 3 dB
Hum and Noise: (Short-circuited A network)
PHONO: 86 dB (MM) TUNER, AUX, TAPE PLAY: 100 dB
Tone Control: Bass: ± 10 dB (100 Hz), Treble: ± 10 dB (10 kHz)
Loudness Contour: (Volume Control set at- 40 dB position) + 6 dB (100 Hz),+ 3 dB (10 kHz)
Semiconductors: Transistors: 30, Diodes: 22
MISCELLANEOUS
Power Requirements: 220/240 V (switchable) 50-60 Hz
Power Consumption: 330 watts (max.)
Dimensions: 380 (W) x 83 (H) x 295 (D) mm
Weight : 7.6 kg
Kilde: http://www.audiokarma.org/forums/showthread.php?t=9656
Sist endret av FlipWare; 6. september 2010 kl. 23:02.
Grunn: Smilefjes :D