A few people have asked me to post how to make JWH E-liquid. I don't do this kind of instructional thing very often so I will try to be as clear as possible.

This is a zero nicotine liquid

AAAHHHEEMM ( Clears Throat) This is not for human consumption


Items Needed:

1 ea. Razor Blade ( umm Hardware store )

1 ea. 15ml Boston Round plastic or glass dropper bottle with cap. http://www.usplastic...44778&catid=750

1 ea. 5ml Syringe with 16 gage blunt syringe needle. http://jensenglobal..../JG16-0.5E.html and http://jensenglobal....1/JG5CC-LL.html

1 ea. Bottle PG (Propylene Glycol) Available at http://shop.perfumer...ng-liquids.aspx

1 ea. 1g Pack of JWH or another synthetic ( I'm sure you know where to get it if it's in stock )

1 ea. Kettle of hot water. ( It's in your kitchen Duh )

1 ea Cup or 2" deep heat resistant container or bowl ( not plastic ) ( Also in your kitchen )
1 ea. Small bottle of high quality Vodka ( or a big bottle from your local relaxation theropist if you feel like celebrating )

Mixing instructions:

NOTE: JWH E-Liquid will not work with VG ( Vegetable Glycerin ) VG is to thick for the JWH to mix evenly.

1. Remove Lid and Dropper Tip from the Boston round bottle and set lid and dropper tip aside.

2. Using Syringe with 10 gage needle draw 1ml of PG into the syringe. Empty the syringe with the 1ml of PG into the Boston Round bottle.

3. Weigh out 20mg of JWH, finely chop JWH with razor blade so there are no large chunks and add to the PG in the Boston round bottle.

4. Replace dropper top and cap on the Boston round bottle. Make sure cap is snug.

5. Fill cup or container with hot water from kettle. (Hot but not boiling)

6. Soak filled Boston round bottle in hot water for 1 hour removing to shake thoroughly every 10-15 minutes. as water cools replace with fresh hot water.

7. Remove bottle from water and dry off bottle. You do not want water getting into your liquid.

You can increase the quantities accordingly if you wish to make a larger batch. Ex. 10ml pg to 200mg JWH. When making a larger batch you will need to add 2 or 3 drops of the high quality Vodka to the mixture to help thin the pg enough to allow the JWH mix in more evenly. Even if you are not making a large batch you can still add a drop of vodka as it does help break down and dissolve the JWH better.

Use Instructions:

Shake bottle well before each use to ensure that the JWH is well mixed in the liquid.

3 drops of E-liquid are dripped directly onto the atomizer (Do not try to put in a filler material) You have to take full 5 second easy draws and hold it in for 6-10 seconds for it to work. It is normal that when you hold in ecig vapor for this period of time you may not see any vapor on the exhale. In this case the body has absorbed all the delicious JWH vapor resulting in a pronounced high. The liquid will work with 3.7V ecigs but works best with a 6V E-Cig Battery Mod. The 6V increases the temp and vaporizes the JWH much more efficiently. The result with 6V is a slightly more pronounce high than a mid level blend. The best part is that unless you flavor it the vapor is odorless and there is often times no vapor to be seen so it is a pretty inconspicuous sneak-a-toke.

Tricks and Tips:

You can flavor your liquid using a water soluble flavor extract that contains no oils. If doing this you will use 8ml PG and 2ml of the flavoring of your choice. Recommend http://www.flavourartexpress.biz , http://shop.perfumer...iy-flavors.aspx or http://capellaflavor...lavordrops.aspx for flavoring. Capellas is weaker so you will need an extra 1ml of the flavoring.

If you want a menthol you can purchase menthol crystals from a variety of places. here is one of them: http://www.ecigexpre...ol-crystals-p-4 You will simply heat the liquid as you did the first time and insert a menthol crystal no bigger than your fingernail. Soak in hot water for approx. 15 min and shake thoroughly. Look to see that crystal is dissolved. If not return to hot water longer. If it is dissolved it is ready to use.