hiv på dette her så får du dualstack ipv6 også, så kan du la være å holde på med portforwarding og åpne i fw direkte mot enhetene dine.

set interfaces ethernet eth0 dhcpv6-pd pd 1 interface lo host-address '::1'
set interfaces ethernet eth0 dhcpv6-pd pd 1 interface lo prefix-id ':0'
set interfaces ethernet eth0 dhcpv6-pd pd 1 interface eth2 host-address '::1'
set interfaces ethernet eth0 dhcpv6-pd pd 1 interface eth2 prefix-id ':1'
set interfaces ethernet eth0 dhcpv6-pd pd 1 interface eth2 service slaac
set interfaces ethernet eth0 dhcpv6-pd pd 1 interface eth3 host-address '::1'
set interfaces ethernet eth0 dhcpv6-pd pd 1 interface eth3 prefix-id ':2'
set interfaces ethernet eth0 dhcpv6-pd pd 1 interface eth3 service slaac
set interfaces ethernet eth0 dhcpv6-pd pd 1 prefix-length 56
set interfaces ethernet eth0 dhcpv6-pd rapid-commit enable

set firewall ipv6-name WANv6_IN default-action drop
set firewall ipv6-name WANv6_IN description 'WAN inbound traffic forwarded to LAN'
set firewall ipv6-name WANv6_IN enable-default-log
set firewall ipv6-name WANv6_IN rule 10 action accept
set firewall ipv6-name WANv6_IN rule 10 description 'Allow established/related sessions'
set firewall ipv6-name WANv6_IN rule 10 state established enable
set firewall ipv6-name WANv6_IN rule 10 state related enable
set firewall ipv6-name WANv6_IN rule 20 action drop
set firewall ipv6-name WANv6_IN rule 20 description 'Drop invalid state'
set firewall ipv6-name WANv6_IN rule 20 state invalid enable

set firewall ipv6-name WANv6_LOCAL default-action drop
set firewall ipv6-name WANv6_LOCAL description 'WAN inbound traffic to the router'
set firewall ipv6-name WANv6_LOCAL enable-default-log
set firewall ipv6-name WANv6_LOCAL rule 10 action accept
set firewall ipv6-name WANv6_LOCAL rule 10 description 'Allow established/related sessions'
set firewall ipv6-name WANv6_LOCAL rule 10 state established enable
set firewall ipv6-name WANv6_LOCAL rule 10 state related enable
set firewall ipv6-name WANv6_LOCAL rule 20 action drop
set firewall ipv6-name WANv6_LOCAL rule 20 description 'Drop invalid state'
set firewall ipv6-name WANv6_LOCAL rule 20 state invalid enable

set firewall ipv6-name WANv6_LOCAL rule 30 action accept
set firewall ipv6-name WANv6_LOCAL rule 30 description 'Allow IPv6 icmp'
set firewall ipv6-name WANv6_LOCAL rule 30 protocol ipv6-icmp
set firewall ipv6-name WANv6_LOCAL rule 40 action accept
set firewall ipv6-name WANv6_LOCAL rule 40 description 'allow dhcpv6'
set firewall ipv6-name WANv6_LOCAL rule 40 destination port 546
set firewall ipv6-name WANv6_LOCAL rule 40 protocol udp
set firewall ipv6-name WANv6_LOCAL rule 40 source port 547

set interfaces ethernet eth0 firewall in ipv6-name WANv6_IN
set interfaces ethernet eth0 firewall local ipv6-name WANv6_LOCAL