prøvd følge guides her med konfig av min edgerouter poe.
Får ikke noe dhcp på vlan 102. 101 gir dhcp med en gang.
Kode
show dhcp client leases
interface : eth1.101
ip address : 10.170.134.36 [Active]
subnet mask: 255.255.254.0
domain name: lyse.net [overridden by domain-name set using CLI]
router : 10.170.134.1
name server: 92.220.228.70 109.247.114.4
dhcp server: 109.247.116.53
lease time : 85490
last update: Fri Jan 2 13:25:32 UTC 2015
expiry : Sat Jan 03 13:10:13 UTC 2015
reason : REBOOT
interface : eth1.102
last update: Fri Jan 2 13:26:27 UTC 2015
reason : FAIL
interface : eth1
last update: Fri Jan 2 13:26:27 UTC 2015
reason : FAIL
Skal jeg sette på bridge mode på mine sider på vikenfiber eller ikke?
Mac adressen jeg har brukt er den som står på undersiden av min zyxel 2812. Har bare delt de opp parvis med : imellom.
Dette er min konfig jeg har nå
Kode
firewall {
all-ping enable
broadcast-ping disable
ipv6-receive-redirects disable
ipv6-src-route disable
ip-src-route disable
log-martians enable
name WAN_IN {
default-action drop
description "WAN to internal"
rule 10 {
action accept
description "Allow established/related"
state {
established enable
related enable
}
}
rule 20 {
action drop
description "Drop invalid state"
state {
invalid enable
}
}
}
name WAN_LOCAL {
default-action drop
description "WAN to router"
rule 10 {
action accept
description "Allow established/related"
state {
established enable
related enable
}
}
rule 20 {
action drop
description "Drop invalid state"
state {
invalid enable
}
}
}
receive-redirects disable
send-redirects enable
source-validation disable
syn-cookies enable
}
interfaces {
ethernet eth0 {
address 192.168.1.1/24
duplex auto
poe {
output off
}
speed auto
}
ethernet eth1 {
address dhcp
duplex auto
mac xx:xx:xx:xx:xx:xx
poe {
output off
}
speed auto
vif 100 {
description ALTIBOX_CONFIG
mtu 1500
}
vif 101 {
address dhcp
description TV_WAN
dhcp-options {
default-route no-update
default-route-distance 210
name-server update
}
}
vif 102 {
address dhcp
description Internetwan
firewall {
in {
name WAN_IN
}
local {
name WAN_LOCAL
}
}
}
}
ethernet eth2 {
duplex auto
poe {
output off
}
speed auto
}
ethernet eth3 {
duplex auto
poe {
output off
}
speed auto
}
ethernet eth4 {
address 192.168.200.1/24
description "LAN Network"
duplex auto
mtu 1500
poe {
output off
}
speed auto
}
loopback lo {
}
switch switch0 {
mtu 1500
}
}
protocols {
igmp-proxy {
interface eth1.101 {
alt-subnet 0.0.0.0/0
role upstream
threshold 1
}
interface eth4 {
alt-subnet 0.0.0.0/0
role downstream
threshold 1
}
}
static {
route 172.21.0.0/16 {
next-hop 10.170.134.1 {
}
}
}
}
service {
gui {
http-port 80
https-port 443
older-ciphers enable
}
nat {
rule 5010 {
description "masquerade for WAN"
outbound-interface eth1.102
type masquerade
}
rule 5011 {
description "masquerade for TV_WAN"
destination {
address 172.21.0.0/16
}
outbound-interface eth1.101
protocol all
type masquerade
}
}
ssh {
port 22
protocol-version v2
}
unms {
disable
}
}
prøvd følge guides her med konfig av min edgerouter poe.
Får ikke noe dhcp på vlan 102. 101 gir dhcp med en gang.
Kode
show dhcp client leases
interface : eth1.101
ip address : 10.170.134.36 [Active]
subnet mask: 255.255.254.0
domain name: lyse.net [overridden by domain-name set using CLI]
router : 10.170.134.1
name server: 92.220.228.70 109.247.114.4
dhcp server: 109.247.116.53
lease time : 85490
last update: Fri Jan 2 13:25:32 UTC 2015
expiry : Sat Jan 03 13:10:13 UTC 2015
reason : REBOOT
interface : eth1.102
last update: Fri Jan 2 13:26:27 UTC 2015
reason : FAIL
interface : eth1
last update: Fri Jan 2 13:26:27 UTC 2015
reason : FAIL
Skal jeg sette på bridge mode på mine sider på vikenfiber eller ikke?
Mac adressen jeg har brukt er den som står på undersiden av min zyxel 2812. Har bare delt de opp parvis med : imellom.
Dette er min konfig jeg har nå
Kode
firewall {
all-ping enable
broadcast-ping disable
ipv6-receive-redirects disable
ipv6-src-route disable
ip-src-route disable
log-martians enable
name WAN_IN {
default-action drop
description "WAN to internal"
rule 10 {
action accept
description "Allow established/related"
state {
established enable
related enable
}
}
rule 20 {
action drop
description "Drop invalid state"
state {
invalid enable
}
}
}
name WAN_LOCAL {
default-action drop
description "WAN to router"
rule 10 {
action accept
description "Allow established/related"
state {
established enable
related enable
}
}
rule 20 {
action drop
description "Drop invalid state"
state {
invalid enable
}
}
}
receive-redirects disable
send-redirects enable
source-validation disable
syn-cookies enable
}
interfaces {
ethernet eth0 {
address 192.168.1.1/24
duplex auto
poe {
output off
}
speed auto
}
ethernet eth1 {
address dhcp
duplex auto
mac xx:xx:xx:xx:xx:xx
poe {
output off
}
speed auto
vif 100 {
description ALTIBOX_CONFIG
mtu 1500
}
vif 101 {
address dhcp
description TV_WAN
dhcp-options {
default-route no-update
default-route-distance 210
name-server update
}
}
vif 102 {
address dhcp
description Internetwan
firewall {
in {
name WAN_IN
}
local {
name WAN_LOCAL
}
}
}
}
ethernet eth2 {
duplex auto
poe {
output off
}
speed auto
}
ethernet eth3 {
duplex auto
poe {
output off
}
speed auto
}
ethernet eth4 {
address 192.168.200.1/24
description "LAN Network"
duplex auto
mtu 1500
poe {
output off
}
speed auto
}
loopback lo {
}
switch switch0 {
mtu 1500
}
}
protocols {
igmp-proxy {
interface eth1.101 {
alt-subnet 0.0.0.0/0
role upstream
threshold 1
}
interface eth4 {
alt-subnet 0.0.0.0/0
role downstream
threshold 1
}
}
static {
route 172.21.0.0/16 {
next-hop 10.170.134.1 {
}
}
}
}
service {
gui {
http-port 80
https-port 443
older-ciphers enable
}
nat {
rule 5010 {
description "masquerade for WAN"
outbound-interface eth1.102
type masquerade
}
rule 5011 {
description "masquerade for TV_WAN"
destination {
address 172.21.0.0/16
}
outbound-interface eth1.101
protocol all
type masquerade
}
}
ssh {
port 22
protocol-version v2
}
unms {
disable
}
}
Sist endret av irvmic; 12. juni 2019 kl. 14:14.
Grunn: Automatisk sammenslåing med etterfølgende innlegg.