Sitat av
baardog
Må være noe galt med multicast innstillingene da?
Kode
show version
Version: v1.10.0
Build ID: 5056252
Build on: 01/25/18 10:31
Copyright: 2012-2018 Ubiquiti Networks, Inc.
HW model: EdgeRouter 4
HW S/N: *********
Uptime: 12:46:11 up 2:05, 3 users, load average: 0.14, 0.10, 0.13
Hmmm.
har du forsøkt å ha dekoderen (Q22) plugget rett i Edgerouteren? For å eliminere at det er noe switch problematikk mellom EdgeRouter og dekoder?
Kan evt forsøke å legge disse reglene inn i brannmuren:
Kode
set firewall name WAN_IN rule 5 action accept
set firewall name WAN_IN rule 5 description "Allow IPTV Multicast UDP"
set firewall name WAN_IN rule 5 destination address 239.0.0.0/8
set firewall name WAN_IN rule 5 protocol udp
set firewall name WAN_IN rule 5 source address 192.168.10.0/24
set firewall name WAN_IN rule 5 log disable
set firewall name WAN_IN rule 6 action accept
set firewall name WAN_IN rule 6 description "Allow IGMP"
set firewall name WAN_IN rule 6 protocol igmp
set firewall name WAN_IN rule 6 log disable
set firewall name WAN_LOCAL rule 5 action accept
set firewall name WAN_LOCAL rule 5 description "Allow IPTV Multicast UDP"
set firewall name WAN_LOCAL rule 5 destination address 239.0.0.0/8
set firewall name WAN_LOCAL rule 5 protocol udp
set firewall name WAN_LOCAL rule 5 source address 192.168.10.0/24
set firewall name WAN_LOCAL rule 5 log disable
set firewall name WAN_LOCAL rule 6 action accept
set firewall name WAN_LOCAL rule 6 description "Allow IGMP"
set firewall name WAN_LOCAL rule 6 protocol igmp
set firewall name WAN_LOCAL rule 6 log disable
forutsatt at dekoder er koblet til eth1 med iprange: 192.168.10.0/24
Sist endret av sindrehaø; 12. mars 2018 kl. 13:02.
Grunn: Feil ip