Har fått i gang Telnet og running conf. ser slik ut:

switchfb2836#show running
config-file-header
switchfb2836
v1.4.7.6 / R800_NIK_1_4_194_194
CLI v1.0
set system mode router

file SSD indicator encrypted
@
ssd-control-start
ssd config
ssd file passphrase control unrestricted
no ssd file integrity control
ssd-control-end cb0a3fdb1f3a1af4e4430033719968c0
!
vlan database
vlan 101-102
exit
voice vlan oui-table add 0001e3 Siemens_AG_phone________
voice vlan oui-table add 00036b Cisco_phone_____________
voice vlan oui-table add 00096e Avaya___________________
voice vlan oui-table add 000fe2 H3C_Aolynk______________
voice vlan oui-table add 0060b9 Philips_and_NEC_AG_phone
voice vlan oui-table add 00d01e Pingtel_phone___________
voice vlan oui-table add 00e075 Polycom/Veritel_phone___
voice vlan oui-table add 00e0bb 3Com_phone______________
bonjour interface range vlan 1
hostname switchfb2836
username xxxxxxx password encrypted xxxxxxxxxxxxxxxxx privilege 15
clock timezone " " 0 minutes 0
ip telnet server
!
interface vlan 101
name IPTV
!
interface vlan 102
name LyseInternett
!
interface gigabitethernet1
switchport mode access
switchport access vlan 102
!
interface gigabitethernet2
switchport mode access
!
interface gigabitethernet3
switchport mode access
!
interface gigabitethernet4
switchport mode access
!
interface gigabitethernet5
switchport mode access
!
interface gigabitethernet6
switchport mode access
switchport access vlan 101
!
interface gigabitethernet8
switchport trunk allowed vlan add 101
!
interface gigabitethernet9
switchport trunk allowed vlan add 101-102
!
exit
ip igmp snooping vlan 101
switchfb2836#